This external link is not available in presentation mode.

To the top
Menu

Systems for vehicle doors and liftgates

The “crank drive for lowerable windows” marked the start of Brose’s innovation success. We also developed and produced the world’s first door system. Then we added closure systems, electronics as well as sensor technology to the portfolio and applied our expertise to the vehicle access. Brose opens up completely new dimensions of comfort with drives for side doors and liftgates that open and close automatically.

#
#

Door system with plastic carrier plate

  • Scalable product and integration scopes (window regulator rails, soundbox, fasteners)
  • Carriers available in fiber-reinforced plastics
  • Endless fiber-reinforced plastics reduce weight in the vehicle and have a positive effect on crash behavior in the door

#
#

Compact module

  • Plastic window regulator with wet-dry room seperation function as a module
  • Weight savings of up to 2 kg per vehicle compared to conventional component design
  • Integration of interfaces for further components such as loudspeaker, crash sensor and door control unit possible

#
#
#
#
#
#
#

Window regulator drive with integrated electronics

Brose window regulator drive

  • Scalable electronic functional scope at different levels, e.g. sensors, auto-down, anti-trap feature, PWM control
  • Variants from 8 to 14 Nm for wet and dry side applications
  • Weight from 270 g

Brose window regulator drive
#
#
#
#
#

Cable window regulator

  • Single or double-guided window regulator with steel, aluminum or plastic guide rails
  • Short development times thanks to high degree of standardization
  • Modular solutions for customer-oriented setting concepts for window regulators for frameless doors

#
#
#
#
#

Door control unit

  • Control of drives for window regulators with anti-trap feature, side mirror and latch
  • Control with standardized interfaces to the window regulator drive
  • Control of side door drives
  • CAN or LIN interface

#
#
#
#
#

Latch module

  • Integrated system for optimal function
  • Integration of additional functions such as window guides and theft-protection
  • All components in a pre-tested, ready-to-fit delivery unit
  • Door assembly therefore reduced by 90 seconds compared to installation of components

#
#
#
#
#

Unilatch® II side door closure system

  • 60 g weight saving compared to previous generation
  • Optimized for high-volume production and global usage
  • Insusceptible to environmental influences
  • Further development of the proven spring clutch

#
#
#
#
#
#
#
#
#
#

Power liftgate drive

Power Liftgate Drive

  • Modular principle for high robustness in all models and load ranges
  • Design as a one or two-sided spindle drive or push rod possible
  • Installation in the rainwater duct or under the roof
  • Integration of brake and overload clutch possible
  • Noise level below 45 dB(A)
  • Mechanical power from 33 to 43 W

Power Liftgate Drive
#
#
#
#
#

Deck lid tension spring drive

Brose Decklid Tension Spring Drive

  • Utilization of standard components for cost savings
  • Modular kit approach for high robustness and flexibility
  • Small package
  • Design with internal torque support
  • Plug & Play solution for manual decklids

Brose Decklid Tension Spring Drive
#
#
#
#
#

Capacitive sensor system for hands-free opening and closing

  • Very low standby current consumption under 170 μA
  • New, more compact generation of electronics with sensor chip for improved sensitivity and same level of insusceptibility to environmental influences
  • High robustness through the use of standardized components

#
#
#
#
#

Liftgate latch with power cinching unit

  • Best opening acoustics achieved through gearless power opening with cord actuator
  • Up to 150 g weight savings per door compared to competitors
  • Function and package space requirements customizable

#
#
#
#
#

Power liftgate drive with additional functions

  • The Brose system comprises:
  • (1) liftgate drive
  • (2) sensors
  • (3) latch with (4) power cinching unit
  • (5) control unit
  • (6) obstacle detection sensor

#
#
#
#
#
#
#

Side door drive

  • Power opening and closing of even heavy doors in angled positions and on slopes
  • Integrated variable door check with zero-current brake
  • Attached to conventional structural interfaces, can thereby be offered as an optional feature
  • Modular design for flexible use and shorter development periods

#
#

Side door drive with additional functions

  • The Brose system comprises:
  • (1) drive
  • (2) obstacle detection sensor
  • (3) periphery monitoring radar sensor
  • (4) control unit
  • (5) open-by-wire latch with (6) power cinching unit

#
#